Skip to content
NEW WEBSITEThe new website is live! Please let us know if you come across any issues.Contact →

Osiris Distortion / Sustainer

Based On
Black Arts Pharaoh
Effect Type
Distortion / Sustainer, Fuzz
Build Difficulty
Easy
Project Summary
Based on the classic Big Muff circuit, this pedal adds a high/low impedance switch, a diode selector switch, and a high-end control inside the tone stack.
Osiris Distortion / Sustainer printed circuit board

Printed Circuit Board

What's included?
PCB, build instructions, and parts list.

$12.00

In stock

Complete Kit

Not yet available.
Kits are developed based on interest, so if you’d like to see one for this project, let us know.

Project overview

The Osiris Distortion/Sustainer is adapted from the Black Arts Toneworks Pharaoh Fuzz, a Big Muff-based circuit with a few modifications.

First, an input impedance switch has been added to the front of the circuit. By reducing the signal level before the boost and clipping stages, you can match it to high-output instruments or earlier pedals in the chain, or just reduce the overall signal level for more headroom and less clipping.

Second, a clipping switch has been added to control has been added to go between silicon and germanium diodes in the second clipping stage. The silicon diodes are in the stock Big Muff for a familiar sound, while germaniums will be more compressed and distorted, but also softer with a more rounded clipping waveform.

Third, a “High” control has been added to the bass side of the tone control rotation allowing the low-pass filter frequency to be adjusted. This restores some of the high end so you don’t have to choose between a bass emphasis and treble emphasis.